Zebedee® Original – Any Angle Clothes Rail


Zebedee Original Sloping Clothes Rail is literally the original! It is funky and functional with the steel coil designed to hold clothes or any item in place, at virtually any angle!  Zebedee Original is fabulously industrial but at the same time subtle and neutral.  Leave it open to the room or build into wardrobes.

Zebedee Original  is quietly striking with its tough, and hard wearing steel finish, which goes with anything and everything.  It comes in a range of sizes which can be fitted in a run to cover any length. A 900mm rail will hold approximately 34 items (see below).

N.B Based in the E.U? Please Order your Zebedee Original via Amazons EU pages. It will be then sent from Germany, meaning you save on customs duty and import fees, and shipping. If we send from here – your customs people will contact you for payment upfront.

Prior to ordering, please see below and the Installation Page for our Measuring & Installation Guide.

Sizes Available* : 500mm, 600mm, 700mm, 800mm, 900mm

*Subject to stock.
SKU: GAL Category:

Zebedee Original, Sloping Clothes Rail is literally the original!  It is funky and functional with a steel coil which goes with anything and everything.  Zebedee Original Any Angle is fabulously industrial but at the same time, subtle and neutral.

The Zebedee Sloping Clothes Rail is the only, off the shelf, any-angle storage rail. It has been designed specifically to provide clothes hanging storage for sloping ceilings.   The design features a spring coil, which spirals around a central rod.  A hanger is hung on each turn of the coil and your clothes are captured, held nicely spaced apart and most importantly, don’t slide into a heap.

Capable of carrying around 60 kg, a 900 mm Zebedee will hold approximately 34 items with one hanger at each turn of the coil. T-shirts and light items can be doubled up – while heavy winter coats, spaced further apart.  Every inch of the height available is used by hanging your maxi dresses or long coats at the tall end, and smaller items at the other.

Zebedee will mirror virtually any angle, however steep. It is perfect for the dormer bedroom, loft conversion, walk in wardrobe, under the stairs, the kitchen or even the garden shed.

With a Zebedee Sloping Clothes Rail, hang your clothes in style in that corner of your room previously too awkward to use.   As a stylish designer product in its own right, Zebedee is intended to be left open to the room for easy access.  Alternately, build your rail in, screen it off or cover with a beaded curtain.  The choice is yours.

Quietly striking Zebedee Original, has a steel finish which is tough and hard wearing.  It comes in a range of sizes, which can be combined in a run to cover virtually any length.

Amazingly simple! Stunningly effective!

Measuring & Installation


Zebedee comes in five sizes 500mm, 600mm, 700mm, 800mm and 900mm. The length of the rail is the total length of the Zebedee including the brackets. The brackets are designed to sit back to back to combine different lengths of Zebedee. So a 2000mm space, for instance, can be covered by 2 x 900mm rails. The brackets protrude 7cm and use two screws each. If fitting into an alcove or wardrobe, it is crucial that allowance is made at the top for the protrusion of the bracket and access room for a screw driver.

Zebedee® Original - Any Angle Clothes Rail 8


Zebedee brackets come complete with screws suitable for fitting directly into a wooden support. The easiest method is to fit the brackets to a wooden lath first on a flat surface, using the Zebedee rail as a template. A wooden lath is advised if fitting into a void ceiling – where specialist plugs are required, as it allows for the Zebedee rail loaded weight to be shared by multi points of support. Ideally, leave half a coat hanger width of around 25cm between the Zebedee rail and the back wall. Zebedee can be placed nearer though – as the hangers angle naturally making Zebedee suitable for narrow wardrobe areas.

Zebedee® Original - Any Angle Clothes Rail 9


First, securely fit the bottom bracket to the lath or previously screwed holes or directly into a wooden rafter support. Rest the end nut of the hanging rail into the round section of the bottom bracket, and holding the rail in place (using it as a template), position and mark the top bracket. Remove the rail and loosely fit the top bracket. Replace the rail and tighten the screws! Job done! If fitting further rails, back to back the next bracket and repeat!

Zebedee® Original - Any Angle Clothes Rail 10

Download Zebedee Fitting Guide

Frequent Questions & Shipping

Frequent Questions.

“Do you ship internationally?”

Yes with pleasure! U.S.A, Canada and most of Europe not a problem. Postage is worked out automatically at checkout. Any problem, please contact us.

“How long before my order is dispatched?”

You will receive an order confirmation email once you have placed your order and a dispatch email when the order is processed.  Most orders are sent within 24 hours. Tracking is emailed too. Please keep an eye on your  ‘spam’ folder!

“How long will it take for my order to arrive?”

Mainland UK: 24-48 hours.  Off shore U.K / Northern Ireland 3-5 working days. Europe, U.S.A, Canada 5-10 working days.

Please notify us of none delivery:

  • For U.K orders, within 3-5 working days, following dispatch.
  • For European orders, within 10 working days, following dispatch.
  • For ROW orders, within 14 working days, following dispatch.


Safe Place deliveries: Safe place deliveries are at the discretion of the Courier and at the sole risk of the customer.

More about Delivery Click Here