Zebedee Chrome Angled Hanging Rail – our delicious Full Chrome Zebedee! As its name indicated, it is a lovely chrome finish from tip to toe. One of the very lovely electroplated finishes, the crisp and pure Zebedee Chrome Zebedee Rail, is a stunning addition to the Zebedee angled clothes rail range.

Specifically designed to provide wardrobe hanging storage for sloping ceilings, the Zebedee Rail features a spring coil, which spirals around a central rod, so a hanger can be hung on each turn of the coil. As a result, your clothes (or any item) are captured, held nicely spaced apart and most importantly, are prevented from sliding into a heap.

Capable of carrying 60 kg, a 900 mm Zebedee will hold approximately 34 items with one hanger at each turn of the coil or 60 plus if doubled up. Utilise every inch of the height available hanging your maxi dresses or long coats at the tall end, and smaller items at the other.

Zebedee Full Chrome has a smooth, mirror finish which is tough and hard wearing.

It is the perfect finishing touch for your open angled clothes rail wardrobe, bedroom or under stairs alcove.

Amazingly simple – stunningly effective.

Measuring & Installation

STEP 1

How to measure:

Zebedee comes in five sizes 500mm, 600mm, 700mm, 800mm and 900mm. The length of the rail is the total length of the Zebedee including the brackets. The brackets are designed to sit back to back to combine different lengths of Zebedee. So a 2000mm space, for instance, can be covered by 2 x 900mm rails. The brackets protrude 7cm and use two screws each. If fitting into an alcove or wardrobe, it is crucial that allowance is made at the top for the protrusion of the bracket and access room for a screw driver.

Zebedee® Full Chrome - Any Angle Clothes Rail 3

STEP 2

The fitting of Zebedee is crucial:

Zebedee brackets come complete with screws suitable for fitting directly into a wooden support. The easiest method is to fit the brackets to a wooden lath first on a flat surface, using the Zebedee rail as a template. A wooden lath is advised if fitting into a void ceiling – where specialist plugs are required, as it allows for the Zebedee rail loaded weight to be shared by multi points of support. Ideally, leave half a coat hanger width of around 25cm between the Zebedee rail and the back wall. Zebedee can be placed nearer though – as the hangers angle naturally making Zebedee suitable for narrow wardrobe areas.

Zebedee® Full Chrome - Any Angle Clothes Rail 4

STEP 3

Fitting the brackets:

First, securely fit the bottom bracket to the lath or previously screwed holes or directly into a wooden rafter support. Rest the end nut of the hanging rail into the round section of the bottom bracket, and holding the rail in place (using it as a template), position and mark the top bracket. Remove the rail and loosely fit the top bracket. Replace the rail and tighten the screws! Job done! If fitting further rails, back to back the next bracket and repeat!

Zebedee® Full Chrome - Any Angle Clothes Rail 5

Download Zebedee Fitting Guide

.threestep label {float: left;width: 100%; border-bottom: 1px solid #eee; padding-bottom: 10px; margin-bottom: 20px;}
.stepcontent {float: left;width: 100%; min-height: 300px; margin-bottom: 20px; border-bottom: 1px solid #eee;}

Additional information

Weight	N/A
Dimensions	N/A

Frequent Questions & Shipping

Frequent Questions.

“Do you ship internationally?”

Yes with pleasure! U.S.A, Canada and most of Europe not a problem. Postage is worked out automatically at checkout. Any problem, please contact us.

“How long before my order is dispatched?”

You will receive an order confirmation email once you have placed your order and a dispatch email when the order is processed. Most orders are sent within 24 hours. Tracking is emailed too. Please keep an eye on your ‘spam’ folder!

“How long will it take for my order to arrive?”

Mainland UK: 24-48 hours. Off shore U.K / Northern Ireland 3-5 working days. Europe, U.S.A, Canada 5-10 working days.

Please notify us of none delivery: