Back
Previous product
Zebedee Any Angle Hanging Rail - Bronze - Product image - zoomed Bronze £71.94£105.60 inc VAT
Next product
Zebedee Any Angle Hanging Rail - Product image - Zoomed Brass £83.94£117.60 inc VAT

Rose Copper

£83.94£117.60 inc VAT

Introducing Zebedee Rose Copper – the fabulous new addition to the Zebedee range.  Stunning Zebedee Rose Copper is coated in real Copper which will develop a lovely patina overtime.  It is soft and romantic, modern and timeless and is perfect for your under eaves bedroom or dressing room.

Stylish, strong and funky, Zebedee Hanging Rails come complete with brackets and in a range of sizes which can be butted up together.  Zebedee will mirror virtually any angle, as the specially designed coil prevents your items from sliding into a heap.  A 600 mm rail will hold approximately 23 items or 40 plus if you double up the hangers!

See below for full description.

Prior to ordering, please see the Installation Page for our Measuring & Installation Guide.

Sizes Available* : 500mm, 600mm, 700mm, 800mm, 900mm

*Subject to stock
Clear
SKU: ROS- Category:
Description

Introducing the sumptuous Rose Copper Zebedee Hanging Rack.  Perfect for Dormer Bedrooms, the coil is electroplated in real copper which will develop a beautiful patina over time.  Rich and romantic, Zebedee Rose Copper is ideal for the modern or classic dressing room or bedroom alike.

The Zebedee is the only and original, off the shelf, Any Angle Hanging Rack. It has been designed specifically to provide clothes hanging storage for sloping ceilings.   The design features a spring coil, which spirals around a central rod, so a hanger can be hung on each turn of the coil.  As a result, your clothes (or any item) are captured, held nicely spaced apart and most importantly, are prevented from sliding into a heap.

Capable of carrying 50 kg plus, a 900 mm Zebedee will hold approximately 34 items with one hanger at each turn of the coil. T-shirts and light items can be doubled up – while heavy winter coats, spaced further apart.  Utilise every inch of the height available hanging your maxi dresses or long coats at the tall end, and smaller items at the other.

Zebedee will mirror virtually any angle. It is perfect for the dormer bedroom, loft conversion, walk in wardrobe, under the stairs, the kitchen or even the garden shed.

In the past, the usual answer to angled ceilings in bedrooms was bespoke wardrobes.  But surely, they are really a bit too 80’s for your new modern chill zone?  They can shrink the room, are bulky, pricey and how many weeks do they take?!!

With a Zebedee Hanging Rack, you can hang your clothes in style in that corner of your room previously too awkward to use.  As a stylish designer product in its own right, your rail can be left open to the room for easy access.  Alternately, you could build your Zebedee in, screen it off or cover with a beaded curtain.

Zebedee Rose Copper is fabulously eye-catching with its electroplated copper finish which is tough and hard wearing. It comes in a range of sizes which can be combined in a run to cover virtually any length.

Amazingly simple. Stunningly effective.

Measuring & Installation

STEP 1

Zebedee comes in five sizes 500mm, 600mm, 700mm, 800mm and 900mm. The length of the rail is the total length of the Zebedee including the brackets. The brackets are designed to sit back to back to combine different lengths of Zebedee. So a 2000mm space, for instance, can be covered by 2 x 900mm rails. The brackets protrude 7cm and use two screws each. If fitting into an alcove or wardrobe, it is crucial that allowance is made at the top for the protrusion of the bracket and access room for a screw driver.

Rose Copper 1

STEP 2

Zebedee brackets come complete with screws suitable for fitting directly into a wooden support. The easiest method is to fit the brackets to a wooden lath first on a flat surface, using the Zebedee rail as a template. A wooden lath is advised if fitting into a void ceiling – where specialist plugs are required, as it allows for the Zebedee rail loaded weight to be shared by multi points of support. Ideally, leave half a coat hanger width of around 25cm between the Zebedee rail and the back wall. Zebedee can be placed nearer though – as the hangers angle naturally making Zebedee suitable for narrow wardrobe areas.

Rose Copper 2

STEP 3

First, securely fit the bottom bracket to the lath or previously screwed holes or directly into a wooden rafter support. Rest the end nut of the hanging rail into the round section of the bottom bracket, and holding the rail in place (using it as a template), position and mark the top bracket. Remove the rail and loosely fit the top bracket. Replace the rail and tighten the screws! Job done! If fitting further rails, back to back the next bracket and repeat!

Rose Copper 3

Download Zebedee Fitting Guide

Shipping & Delivery

You will receive an order confirmation email once you have placed your order and a dispatch email when the order is processed. Please check your ‘spam’ folder if not received. We process all orders first thing in the morning on all working days and generally dispatch the same day for orders placed before 11 am. All orders placed after 11 am on Friday and on the weekend will be processed on Monday. Next day delivery, by prior arrangement.

Please notify us of none delivery:

  • For U.K orders, within 3-5 working days, following dispatch.
  • For European orders, within 5-10 working days, following dispatch.
  • For ROW orders, within 7-14 working days, following dispatch.

 

Safe Place deliveries: Safe place deliveries are at the discretion of the Courier and at the sole risk of the customer.

More about Delivery Click Here